The wide range of tools and attachments can be confusing though.
You shouldn’t wash the post-motor filter.If the post-motor filter has become clogged with dirt, the only option is to replace it..
Unplug the vacuum and make sure you’re not holding down the trigger..Remove the pre-motor filter by lifting it out of the top of the main body..Rinse the pre-motor filter in cold water until the water runs clear, then tap out any loose dirt.
Never use hot water or a washing machine for this step..Gently squeeze out excess water by twisting the filter to speed up the drying time..
Allow the filter to completely dry for at least 24 hours before replacing it back into the machine.. As a general rule, you should clean the pre-motor filter of the Dyson V7 at least once per month.
You may need to clean it more frequently if you’re vacuuming a lot of fine dust.. Related Article:.Step 2: Apply a Washing Up Liquid and White Vinegar Solution to the Stain.
While you can use plain water to clean a stain, this isn’t the most effective cleaning fluid..Instead, mix a solution containing one tablespoon of.
, one tablespoon of washing up liquid, and 500ml of warm water.. Pour a small amount of the mixture onto a clean white cloth, then gently apply the solution to the stain.Allow it to sit for a few minutes, then blot it up with a dry cloth..
(Editor: Trending Scooters)