Frequently Asked Questions.
If the post-motor filter has become clogged with dirt, the only option is to replace it..Unplug the vacuum and make sure you’re not holding down the trigger..
Remove the pre-motor filter by lifting it out of the top of the main body..Rinse the pre-motor filter in cold water until the water runs clear, then tap out any loose dirt.Never use hot water or a washing machine for this step..
Gently squeeze out excess water by twisting the filter to speed up the drying time..Allow the filter to completely dry for at least 24 hours before replacing it back into the machine.. As a general rule, you should clean the pre-motor filter of the Dyson V7 at least once per month.
You may need to clean it more frequently if you’re vacuuming a lot of fine dust.. Related Article:.
How to Clean a Dyson V7 Vacuum.Once the stain has been removed by the cleaning mixture, apply plain cold water to the previously affected area with a sponge to rinse the fibres.
Blot this up with another dry, white cloth.. You should now give the carpet plenty of time to fully dry.If possible, open the windows and use a fan to speed up the drying process, as this reduces the chance of a. damp carpet smell.
You can also put some paper towels over the previously stained area and weigh them down to remove more fluid.Keep replacing the towels until they are no longer absorbing water, then remove them to allow the area to air dry..
(Editor: Elegant Scanners)