Vacuuming usually isn’t strong enough to remove these from surfaces, which is another reason why a vacuum isn’t a complete solution for a bed bug infestation.. What Type of Vacuum Should You Use for Bed Bugs?.
It’s much easier to work with the floorhead when it’s not attached to the main vacuum..Removing the floorhead means there’s no chance of accidentally switching the vacuum on while cleaning the brush, which could cause injury..
Step 2: Remove The Brush Bar.Use a coin to turn the lock at the end of the Vax Blade 4 brush bar.You should then be able to slide out the brush bar from the floorhead, which makes it much easier to clean.. On a side note, it’s great that Vax makes it so simple to remove the brush bar from the Blade 4’s floorhead.
Maintenance is often overlooked when buying a vacuum cleaner, but it’s much easier to clean the Blade 4’s brush bar than many other models..Step 3: Cut Away Tangled Hair Or Carpet Fibres.
Now it’s time to cut away hair and other fibres that have become caught around the brush bar.. Slide the scissors along the groove in the brush bar, as this makes it easier to get the scissors underneath the fibres.
Be careful not to cut any of the bristles on the brush, as this could affect performance.. Vax doesn’t recommend using water to clean the brush bar.Unplug the Roomba Clean Base from the wall.. Get your new bag ready.
Roomba bags are not reusable, so you shouldn’t try to empty the old bag..Lift the old bag out of the Clean Base using the grey tab at the top of the bag.
This ensures the bag automatically closes to prevent dust, dirt, and other allergens from escaping.. Slide the new bag into the slots inside the Clean Base.Push the bag down until it’s firmly in place, as this ensures the hole of the bag matches up with the inlet..
(Editor: Budget Projectors)