Again, call a professional if you’re concerned about the socket.. 2.
Once the base plate is removed, you should be able to access both the brushroll and the belt..But before you start the replacement process, look carefully at how the belt attaches to the brush roll.
Is it held in place by tension alone?Or is there something else that’s holding the belt in position?Does the brush need to be removed?
It’s important to check so you know how to attach the new belt.. Once you understand how the belt attaches, you may need to remove the brush roll (often by sliding it through the belt loop) and then detach the belt from the motor shaft.On some vacuums, you can just slide off the drive belt without needing to remove the brush roll..
Take a few photos of the brush bar before you remove it, just in case you forget how the various parts fit back together..
Step 4: Install the New Belt.Your Shark vacuum’s manual will contain specific cleaning instructions for your model, so make sure you read it.
You should also be aware of the what the.various indicator lights mean on your Shark vacuum.
Washing your Shark cordless vacuum’s dust cup is an important part of maintaining your machine.Dirt or grime build-up inside the dust cup can lead to bad odours when vacuuming, which is something you definitely want to avoid.
(Editor: Mini Scanners)